Adjusting timing on 22R-E engine without a timing light

[ Follow Ups ] [ Post Followup ] [ Toyota 4x4 Pickup On-line Discussion Group ] [ FAQ ]

Posted by Sidney on August 15, 2008 at 16:45:56:

When adjusting timing on an 22R-E engine without a timing light do you rotate the crank pulley until the notch is at 0 degrees BDTC and make sure the rotor on the distributor cap points to spark plug # 1 on the distributor cap?.

When I rotated the crank pulley on my 22R-E engine to 0 degree BTDC the rotor was pointing above the spark plug # 1 on the distributor cap,could the distributor drive gear be off by a tooth? when the prior owner had the headgasket replaced along time ago.

She doesn't start right away and misses/bucks under load specially at highways and seems to lack slight power.Thanks in advance for help/replies.

Sidney® ™
Repairs TV's,VCR's,home/car audio out of my apartment
E-mail:sidneybek(at)yahoo.com
Dartmouth,Nova Scotia
Canada
1995 Toyota 4-Runner,22R-E,G58 with 229 000 KM

Follow Ups:



Post a Followup

Name    : 
E-Mail  : 
Subject : 
Comments: Optional Link URL: Link Title: Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Toyota 4x4 Pickup On-line Discussion Group ] [ FAQ ]

WWWBoard 2.0a and WWWAdmin 2.0a © 1997, All Rights Reserved.
Matt Wright and DBasics Software Company