Re: I assume 0 degree BTDC right (nm)

Name    : 
E-Mail  : 
Subject : 

Comments:
: should set crank on degree mark manual says to set timing at

: : : Buz in an earlier post of mine about this problem you said I can check engine base timing without a timing light and here is your reply:

: : : "put the crank on the timing mark u want
: : : turn crank while watching dist. rotor
: : : it will be OBVIOUS if rotor duzn't point rite at the proper cap post
: : : u can set the timing this way very close to perfect
: : : if crank is on mark, rotor must point rite at plug post
: : : timing is also e z to read on plugs
: : : with practice "

: : : well what degree do I set the engine crankshaft pulley to? 0, 5 or what?.Thanks.

: : : Sidney® ™
: : : Repairs TV's,VCR's,home/car audio out of my apartment
: : : E-mail:sidneybek(at)yahoo.com
: : : Dartmouth,Nova Scotia
: : : Canada
: : : 1995 Toyota 4-Runner,22R-E,G58 with 229 000 KM



Optional Link URL:  
Link Title:         
Optional Image URL: