Re: Buz I need your reply here

Posted by Sidney® ™ on August 01, 2008 at 05:17:06:

In Reply to: 1995 4-Runner with cold start & missing/buck problems under load posted by Sidney® ™ on July 27, 2008 at 16:28:48:

Buz in an earlier post of mine about this problem you said I can check engine base timing without a timing light and here is your reply:

"put the crank on the timing mark u want
turn crank while watching dist. rotor
it will be OBVIOUS if rotor duzn't point rite at the proper cap post
u can set the timing this way very close to perfect
if crank is on mark, rotor must point rite at plug post
timing is also e z to read on plugs
with practice "

well what degree do I set the engine crankshaft pulley to? 0, 5 or what?.Thanks.

Sidney® ™
Repairs TV's,VCR's,home/car audio out of my apartment
E-mail:sidneybek(at)yahoo.com
Dartmouth,Nova Scotia
Canada
1995 Toyota 4-Runner,22R-E,G58 with 229 000 KM

Follow Ups:

• Re: I assume 0 degree BTDC right (nm) Sidney® ™ 05:18:39 08/01/08 (1)
  • Re: I assume 0 degree BTDC right (nm) buz 15:54:42 08/01/08 (0)

Post a Followup

Name    : 
E-Mail  : 
Subject : 

Comments:
: Buz in an earlier post of mine about this problem you said I can check engine base timing without a timing light and here is your reply:

: "put the crank on the timing mark u want
: turn crank while watching dist. rotor
: it will be OBVIOUS if rotor duzn't point rite at the proper cap post
: u can set the timing this way very close to perfect
: if crank is on mark, rotor must point rite at plug post
: timing is also e z to read on plugs
: with practice "

: well what degree do I set the engine crankshaft pulley to? 0, 5 or what?.Thanks.

: Sidney® ™
: Repairs TV's,VCR's,home/car audio out of my apartment
: E-mail:sidneybek(at)yahoo.com
: Dartmouth,Nova Scotia
: Canada
: 1995 Toyota 4-Runner,22R-E,G58 with 229 000 KM





Optional Link URL:  
Link Title:         
Optional Image URL: